RAYNOR STATIC BIN COMPACTOR The Raynor static compactor is designed to give substantial waste disposal economies for medium size commercial and industrial locations. The rugged construction will give years of arduous service and the compact and integral design ensures the minimum demand on space allowing full site utilization. Flexible design means the unit can grow with increasing volume or labour costs so the "in plant" containers can be used in conjunction with a hydraulic sideloading attachment. The unit has the flexibility for this systemised disposal method to be employed immediately or to be fitted at a later date. Similarly. it may be uprated to twin ramming if the nature of the refuse changes. A simplified control circuit together with the highest quality hydraulic components ensure maximum reliability and a 12 minute timer allows continuous operation whilst preventing undue wear during quieter periods. Triple filtration protects components and 110V secondary circuits protect personnel. The 19 tonne thrust of the Raynor Compactor provides for economic compatibility with multi-bucket or roll on containers. A "pin off" switch automatically locates the packing ram for this operation during container disengagement. Loading Aperture .85M X 1.5M Capactiy (Nominal) 1.35m3 Cycle Time 46 secs. Thrust - Normal 17.6 tonnes Thrust - Boost 19.05 tonnes Ram Face Pressure 2 KG/cm2 Stroke 1100 mm Hydraulic Pressure 186 KG/cm Motor Size 10 HP Cylinder Size 114 mm Ram Penetration 250 mm ol Overall length: 2,540 mm ow Overall width : 2,100 mm oh Overall height : 1,430 mm bl Box length : 1,080 mm bw Box width : 1,500 mm cto Clear top opening : 850 mm